Product Category menu

Category background

Battery Regeneration System

Product Detail Information

PRIME Lead-Acid Battery Regenerators (Made-in-KOREA)   

PRIME’ series have the highest quality & restoration performance, while the lowest prices!  
 
   Epoch-making technology in battery regeneration!     Forget all of the previous regenerators!! 
 
  PRIME Regeneration Technology overcomes the limitation of all existing regeneration methods!!!

What is different between Charger and Regenerator ?

* Charger : It cannot improve the capacity and life span of battery.   Even though charger made a full charge, but capacity is not more improved.   (Including all kinds of rejuvenation chargers, pulse chargers and regenerator named chargers)
* Regenerator : It can restore inside cells by melting sulfate crystal on the plates and grids, and it can improve its capacity and life span as almost similar as new battery condition.

Please note that PRIME battery regeneration technology is unprecedented innovation. The exclusive high-frequency pulse regeneration technology with our particular algorithm can be changed on the whole paradigm of battery regeneration as well as maintenance method.  

 

What is the PRIME Battery Regenerator?  
 
=> It is the most innovative machine to restore used lead-acid batteries.

1.       Can restore all kinds of lead-acid batteries (over 40Ah) if any cell was not physically damaged.  

2.       Can remove sulfate crystal on the plates entirely by the optimized real High-frequency pulse.  

3.       Can regenerate most sulfated batteries up to 90~110% capacity against new battery (Except disposal states of physical cell damages) 

4.       Can extend battery’s life spans up to 2~3 times longer and delay the battery’s aging process.  

5.       Can save much costs by battery regenerations. (No more any saved recycle item than this regeneration)  

6.       Can restore batteries without any cell damage through optimized high-frequency pulse algorithm. 

7.       Optimized charging and regeneration algorithm data allows the most efficient way of recharging. 8.       A full automatizing user interface  (No better and easier interface than PRIME machines)  

9.       Multiple-purpose machines : Regenerator, Charger, Discharger, Power Supply(Expert Mode) and Identifier.  

10.   The premium quality and performance with multiple functions, but the lowest prices. (Small Profits and Quick Returns) 

 

All kinds of used lead acid battery can be restored by PRIME unless body or cell was severely damaged.  If the specific gravity is low with a full charge it is because of the sulfate being deposited on the plates/grids instead of being in solution.  Changing the electrolyte or adding more acid won’t help because of the sulfate already built up on the plates. There is no way to clean the plates except possibly by using a high-efficiency battery regenerator such as PRIME series.   We have a confidence that PRIME machines are the most advanced regenerators in the world.       

  • We have a full line up of battery regenerators and dischargers to make the regeneration centers in franchise.


 

 

PRIME RPTi-1000 ; It is a very special Battery Condition Identifier for all kinds of 6V~48V lead-acid batteries.  It supports the battery identification up to 300Ah at 6V~24V, and the battery regeneration and charge up to 1,000Ah.  For 12V battery, it is composed of 2 volts x 6 cells.   It is hard to know about shorted circuit /cell cut/cell corrosion state and any damaged cells prior to a restoration process.  In this reason, the other competitors must check on these damaged cases after regeneration process only.  So, we have developed on ‘RPTi-1000’(Regeneration/Charge Capacity : DC6V~48V, Up to 300Ah identification).  It can find the short of electrodes and damaged cells within few minutes before restoration procedure.  It also have multi-functions of digital Regenerator & Charger(1KW)+digital Discharger(840Watts)+ Expert Mode for manual free settings of Voltage, Current & Time.  Auto battery identification function (whether to be restored or not - by ‘IDENTIFICATION’ mode). By using it, most batteries will be assorted for targeting ones to be regenerated with our new RPTi-1000  as well as we can be restored for even a lower voltage measured batteries by RPTi-1000 if they do not have any cell cut or short and internal cell's damage(corrosion). RPTi-1000 has a full automated function to regenerate by setting of Voltage and Total capacity and Battery type.  

RPTi-1000 is not an analyzer, but a battery condition identifier
with regenerator & discharger for 6V~48V batteries.   At ‘IDENTIFICATION’ mode, it can identify the battery conditions within a few minute. You can see it as Cell-cut, Cell-short or Corrosion on the screen with a beep sound.  If the battery is identified as a good battery to be regenerated, then you can see "O.K-Identified" on the screen with a beep sound as well.  With RPTi-1000, you can regenerate all kinds of lead-acid batteries including 6V~48V VRLA AGM & GEL, Car, Deep Cycle, Solar and so on.  The battery identification will be supported up to 300Ah capacity, and the other functions would be supported up to 1,000 Ah capacity by the maximum output currents of 6~24V : 30A, 36V : 25A and 48V : 20A.   The discharger supports up to 840 watts.

RPTi-1000 (5-in-1) ;   220VAC  Single Phase
                  1.  Battery Condition Identifier at ‘IDENTIFICATION’ mode FOR 6V~48V, up to 300Ah
                  2.  Battery Regenerator at ‘REGENERATION’ mode FOR 6V~48V, 40Ah~ 1,000Ah
              
    3.  Battery Charger at ‘CHARGE’ mode FOR 6V~48V, 40Ah~ 1,000Ah
                
  4.  Battery Discharger (840 Watts) at ‘DISCHARGE’ mode
                 
5.  Expert Mode (6V~48V free setting mode of Voltage, Current & Time for special & sleeping batteries, same as a POWER SUPPLY Mode)
                         * Mainly used for all kind
s of Solar, UPS, Deep Cycle batteries, but mostly applied up to 300Ah of 48V battery
                         * Maximum Output Current : 6V~24V = 30A,  36V = 25A  and  48V = 20A  
                         * A serial connection up to 12V x 4
(or 2V x 24) batteries at the same time. (‘REGENERATION’ and ‘CHARGE’ modes)

RPT-E300 : It is a Regenerator ; DC6~48V, 40Ah~1,000Ah, 4 batteries in serial connection at the same time.  Same specification as RPTi-1000, but Discharger and Identification modes are excluded. (REGENERATION, CHARGE & EXPERT MODES as 3-in-1)   220VAC Single Phase     


* The regeneration time with any PRIME regenerator takes 15 hours including a full charge.  But any battery was already nearly full charged, the operation of PRIME will be automatically stopped earlier, regardless of its setting time (15 hours).


    *  PRIME regeneration methods are not adding any sulfuric-acid and chemical additive in any cell at all.

 

 

 

 

Product Detail Image

Battery Regeneration System

Battery Regeneration System

Battery Regeneration System

Battery Regeneration System

Battery Regeneration System

Battery Regeneration System