Category background
[Participated in Online Exhibition]
PRIME
Lead-Acid Battery Regenerators
(Made-in-KOREA)
‘PRIME’ series have the
highest quality & restoration performance, while the lowest prices!
◈ Epoch-making technology in
battery regeneration! Forget all of the previous
regenerators!!
◈ PRIME Regeneration Technology
overcomes the limitation of all existing regeneration methods!!!
What is different between Charger and Regenerator
?
* Charger : It
cannot improve the capacity and life span of battery. Even though
charger made a full charge, but capacity is not more improved.
(Including all kinds of rejuvenation chargers, pulse chargers and regenerator
named chargers)
*
Regenerator : It can
restore inside cells by melting sulfate crystal on the plates and grids, and it
can improve its capacity and life span as almost similar as new battery
condition.
Please
note that PRIME battery regeneration technology is unprecedented innovation.
The exclusive high-frequency pulse regeneration technology with our particular
algorithm can be changed on the whole paradigm of battery regeneration as well
as maintenance method.
1. Can restore all kinds of lead-acid batteries (over 40Ah) if any cell was not physically damaged.
2. Can remove sulfate crystal on the plates entirely by the optimized real High-frequency pulse.
3. Can regenerate most sulfated batteries up to 90~110% capacity against new battery (Except disposal states of physical cell damages)
4. Can extend battery’s life spans up to 2~3 times longer and delay the battery’s aging process.
5. Can save much costs by battery regenerations. (No more any saved recycle item than this regeneration)
6. Can restore batteries without any cell damage through optimized high-frequency pulse algorithm.
7. Optimized charging and regeneration algorithm data allows the most efficient way of recharging. 8. A full automatizing user interface (No better and easier interface than PRIME machines)
9. Multiple-purpose machines : Regenerator, Charger, Discharger, Power Supply(Expert Mode) and Identifier.
10. The premium quality and performance with multiple functions, but the lowest prices. (Small Profits and Quick Returns)
We have a full line up of battery regenerators and dischargers to make the regeneration centers in franchise.
PRIME
RPTi-1000 ; It is a very special Battery Condition
Identifier for all kinds of 6V~48V lead-acid batteries. It supports the battery
identification up to 300Ah at 6V~24V, and the battery regeneration and charge
up to 1,000Ah. For 12V battery, it is composed of 2 volts x 6
cells. It is hard to know about shorted circuit /cell cut/cell
corrosion state and any damaged cells prior to a restoration process. In
this reason, the other competitors must check on these damaged cases after
regeneration process only. So, we have developed on ‘RPTi-1000’(Regeneration/Charge
Capacity : DC6V~48V, Up to 300Ah identification). It can find the short
of electrodes and damaged cells within few minutes before restoration
procedure. It also have multi-functions of digital Regenerator &
Charger(1KW)+digital Discharger(840Watts)+ Expert Mode
for manual free settings of Voltage, Current & Time. Auto battery
identification function (whether to be restored or not - by ‘IDENTIFICATION’
mode). By using it, most batteries will be assorted for targeting ones to be
regenerated with our new RPTi-1000 as well as we can be restored
for even a lower voltage measured batteries by RPTi-1000 if they do not
have any cell cut or short and internal cell's damage(corrosion). RPTi-1000
has a full automated function to regenerate by setting of Voltage and Total
capacity and Battery type.
RPTi-1000 is not an analyzer, but a battery condition identifier with regenerator & discharger for 6V~48V batteries. At ‘IDENTIFICATION’
mode, it can identify the battery conditions within a few minute. You can see
it as Cell-cut, Cell-short or Corrosion on the screen with a beep sound.
If the battery is identified as a good battery to be regenerated, then you can
see "O.K-Identified" on the screen with a beep sound as well.
With RPTi-1000, you can regenerate all kinds of lead-acid batteries including
6V~48V VRLA AGM & GEL, Car, Deep Cycle, Solar and so on. The battery
identification will be supported up to 300Ah capacity, and the other functions
would be supported up to 1,000 Ah capacity by the maximum output currents of
6~24V : 30A, 36V : 25A and 48V : 20A. The discharger supports up to
840 watts.
RPTi-1000 (5-in-1) ; 220VAC Single Phase
1. Battery Condition Identifier at ‘IDENTIFICATION’ mode
FOR 6V~48V, up to 300Ah
2. Battery Regenerator at ‘REGENERATION’ mode FOR 6V~48V, 40Ah~
1,000Ah
3. Battery Charger at ‘CHARGE’ mode FOR 6V~48V, 40Ah~
1,000Ah
4. Battery Discharger (840 Watts) at ‘DISCHARGE’ mode
5.
Expert Mode (6V~48V free setting mode of Voltage, Current & Time for
special & sleeping batteries, same as a POWER SUPPLY Mode)
*
Mainly used for all kinds of Solar, UPS, Deep Cycle batteries, but mostly applied up to 300Ah of 48V battery.
*
Maximum Output Current : 6V~24V = 30A, 36V = 25A and 48V =
20A
*
A serial connection up to 12V x 4 (or 2V x 24)
batteries at the same time. (‘REGENERATION’ and ‘CHARGE’ modes)
* PRIME regeneration methods are not adding any
sulfuric-acid and chemical additive
in any cell at all.